BBG3+1 Heavy Duty Bale Grab

• Heavy duty frame manufactured from high grade S355 sections and plate. 

• 500mm Hardox 450 grab tines 

• Twin hydraulic cylinder operation

• Quick release floatinging tine bar with transport position with options for up to four tines.

• Integral fabricated brackets for any loader manufacturer  

• Galvanised top bale support 

The JSA manufactured Vertical bale grabs are designed for the toughest harvest conditions and the weights of modern high density bales. The grab comes in two models, the BBG3+1 and the BBG4 and relates to the number of standard 900mm high bales it will safely handle. 

Capable of picking and density of bales up from the side of the bale or top and rotating the grab to the horizontal position without risk of dropping the bales. The 500mm long Hardox grab tines penetrate deep into the bale with there unique geometry that pulls the bale in tight to the frame. The grab can be used with or without the floating quick release tine bar that can be fitted or removed without any lifting or tools.

BBG3+1 

Extending back frame

700mm high bales 

Will pick up 4 bales with or without the lower tines and a 5th bale can be on top against the back support  

900mm high bales 

Will pick up 3 bales with or without the lower tines with grab tines in each bale, a 4th bale can sit on top against the back support

1200/1300mm high bales

Will pick up 3 bales with or without the tines. 2 pairs of grab tines in the lower and middle bales and 1 pair in the top bale  

Round bales 

4ft 5ft and 6ft bales can be handled vertically or horizontally (5ft and 4ft bales require the ram position pin to be moved into the outer hole)