HARDOX 300mm Capacity TS300 Tree Shear

The complete range of JSA Tree shears are manufactured from 100% Hardox 450 for the ultimate strength to weight ratio With the TS300 300mm capacity being the most popular in the range. 

Suitable for fitting to excavators from 8 ton to 20 ton and telehandlers. 

Manufactures in Hertfordshire UK, the TS300 is designed to shear the toughest woods found in the UK such as oak and ash. Cutting and holding the tree or branch and placing it where required.  

The TS300 300mm capacity tree shear comes with a trunnion mount oversized hydraulic cylinder that offers incredible shearing capacity and speed. The unique geometry offers the maximum shearing capacity half way through the shearing capacity at the point where the most force is required to shear the tree or branch. The rod side of the cylinder had a large rod diameter reducing the amount of hydraulic oil required to open the cylinder, this improves the cycle time of the shear and allows the timber in the grab to be released quickly in the event of the base machine becoming unstable.

Fitted with a curved profile blade that is only 10mm thick HARDOX reducing the power required to cut the timber and reducing the damage and splitting to the sheared timber and the stump left behind. The blade to grab arm clearance is only 15mm so the shear is also capable of cutting small twigs down to approximately 5 mm diameter. 

The TS300’s 100% HARDOX construction provides an incredibly high strength to weight ratio. With 60 tons of cutting force but a weight of only 335kg with both the top and side mounting bracket. 

With the optional side mount bracket the tree shear can be mounted vertically for cutting side branches from trees.