ATV Slitter 1.5m 30 hardox blades

JSA ATV Slitter 1.5m 30 blade

The JSA Slitter is designed for use behind any vehicle with a 50mm tow hitch to loosen the surface of the soil without disturbing or damaging the grass.

The slitter design is based on out large tractor mounted slitters and uses the same rotor shafts, rotors and 250mm Hardox blades.

The replaceable blades are mounted on a 114mm shaft with 50mm EN8 and 4 bolt 50mm bearing.

The slitter uses large flotation wheels and 50mm ball hitch draw bar.

The draw bar and axle can be removed to use as a cat 1 three point linkage slitter by just removing the bolts and pins that hold the axle and draw bar in position (no additional parts required).